배포판 : 래드햇9.0
커널 : 2.4.20
Redhat 에 FreeS/WAN설치하기
1. 소스 받기
wget ftp://ftp.xs4all.nl/pub/crypto/freeswan/binaries/RedHat-RPMs/`uname -r | tr -d 'a-wy-z'`/\*
아래와 같이 현재 커널 버젼에 맞는 패키지 다운 받는것을 볼수 있다.
freeswan-allkeys -> ../../../freeswan-allkeys
freeswan-allkeys.sig -> ../../../freeswan-allkeys.sig
freeswan-module-2.06_2.4.20_8-0.i386.rpm
freeswan-rpmsign.asc -> ../freeswan-rpmsign.asc
freeswan-sigkey.asc -> ../../../freeswan-sigkey.asc
freeswan-userland-2.06_2.4.20_8-0.i386.rpm
freeswan-allkeys.sig -> ../../../freeswan-allkeys.sig
freeswan-module-2.06_2.4.20_8-0.i386.rpm
freeswan-rpmsign.asc -> ../freeswan-rpmsign.asc
freeswan-sigkey.asc -> ../../../freeswan-sigkey.asc
freeswan-userland-2.06_2.4.20_8-0.i386.rpm
2. 설치 하기
rpm -Uvh freeswan-module-xxx.rpm
rpm -Uvh freeswan-userland-xxx.rpm
rpm -Uvh freeswan-userland-xxx.rpm
3. 실행하기
service ipsec start
4. 테스트 하기
ipsec verify
다음과 같은 결과를 볼수 있다.
Checking your system to see if IPsec got installed and started correctly
Version check and ipsec on-path [OK]
Checking for KLIPS support in kernel [OK]
Checking for RSA private key (/etc/ipsec.secrets) [OK]
Checking that pluto is running [OK]
Version check and ipsec on-path [OK]
Checking for KLIPS support in kernel [OK]
Checking for RSA private key (/etc/ipsec.secrets) [OK]
Checking that pluto is running [OK]
만일 문제가 있다면 아래 링크를 참조 하길..
http://www.freeswan.org/freeswan_trees/freeswan-2.06/doc/trouble.html#install.check
작성자 : 임헌정
작성일 : 2006.05.22
http://www.4ellene.net
참고 사이트 : freeswan.org
Comments List